Measure the required channel from left end to right end. Record one exact finished dimension.
Linsol custom drainage · guided order
Build the right waste.
See every choice.
Choose the grate, exact finish, dimensions, outlets and supply format. Every selection is shown visually and checked by Austpek before manufacture.
Start your grate
316stainless steel
105mmchannel width
3000mmmax single length
Measure before you select
Three checks prevent most custom-order mistakes.
Use one left-hand datum for every measurement and enter dimensions in millimetres. Ask the installer to confirm the outlet size and site requirements before approval.
Custom-order notice
Once the final specification is approved and manufacture begins, the order cannot be cancelled or refunded.
Austpek checks the configuration before payment and manufacture.
Measure from the left end of the channel to the centre point of the outlet—not to its edge.
Channel width is 105 mm. The installer must confirm the required 50, 70 or 80 mm outlet.
Before entering a number: compare the measurement with the approved plan, photograph the tape measure if helpful, and keep the same left-to-right orientation throughout.
9
style + finish combinations
±3mm
manufacturing tolerance
50 · 70 · 80
outlet sizes available
10 day*
supplier turnaround after approval
One clear configuration
Select your product, then specify the job.
All predefined customer choices are visible below. Complex layouts are routed to specialist quote review.
